em8300: Removed

em8300/.footprint

@@ -1,19 +0,0 @@
-drwxr-xr-x	root/root	lib/
-drwxr-xr-x	root/root	lib/firmware/
--rw-r--r--	root/root	lib/firmware/em8300.bin
-drwxr-xr-x	root/root	lib/modules/
-drwxr-xr-x	root/root	lib/modules/<kernel-version>/
-drwxr-xr-x	root/root	lib/modules/<kernel-version>/em8300/
--rwxr-xr-x	root/root	lib/modules/<kernel-version>/em8300/adv717x.ko
--rwxr-xr-x	root/root	lib/modules/<kernel-version>/em8300/bt865.ko
--rwxr-xr-x	root/root	lib/modules/<kernel-version>/em8300/em8300.ko
-drwxr-xr-x	root/root	usr/
-drwxr-xr-x	root/root	usr/bin/
--rwxr-xr-x	root/root	usr/bin/em8300setup
-drwxr-xr-x	root/root	usr/include/
-drwxr-xr-x	root/root	usr/include/linux/
--rw-r--r--	root/root	usr/include/linux/em8300.h
-drwxr-xr-x	root/root	usr/man/
-drwxr-xr-x	root/root	usr/man/man1/
--rw-r--r--	root/root	usr/man/man1/em8300setup.1.gz
-drwxr-xr-x	root/root	usr/share/

em8300/.md5sum

@@ -1,5 +0,0 @@
-58a6765d469cc507c1e0dff152ce3d30  em8300-0.15.3.tar.gz
-a31b4456262d02f3988dab3747fa8092  em8300_kernel_2.6.17_2.patch.gz
-f07886e5c4f7cde5301c4813820926f1  em8300_ntsc_default.patch.gz
-b39bbd42ff8489e1b79bcc3211cbd4d4  em8300_ntsc_pos.patch.gz
-7534e59ca9ddc6188e98df0c31803855  em8300_zoom.patch.gz

em8300/Pkgfile

@@ -1,30 +0,0 @@
-# Description:	Linux DXR3 and Hollywood+ Driver
-# URL:		http://dxr3.sf.net
-# Maintainer:	Alan Mizrahi, alan at mizrahi dot com dot ve
-# Depends on:
-
-name=em8300
-version=0.15.4cvs2
-release=2
-source=(http://download.sourceforge.net/dxr3/$name-0.15.3.tar.gz em8300_kernel_2.6.17_2.patch.gz em8300_zoom.patch.gz em8300_ntsc_pos.patch.gz em8300_ntsc_default.patch.gz)
-
-build () {
-	cd $name-0.15.3
-	# Changes to work with kernel 2.6.17 or superior
-	zcat ../em8300_kernel_2.6.17_2.patch.gz | patch -p0
-	# Enables the usage of a zoom factor in /sys/class/em8300/em8300-0/device/zoom
-	zcat ../em8300_zoom.patch.gz | patch -p0
-	# Fixes the position for ntsc video signal
-	zcat ../em8300_ntsc_pos.patch.gz | patch -p0
-	# Makes ntsc the default (you can change this with em8300setup, but you can comment this)
-	zcat ../em8300_ntsc_default.patch.gz | patch -p1
-	./configure --prefix=/usr
-	make
-	make DESTDIR=$PKG install
-	cd modules
-	make
-	make DESTDIR=$PKG install
-	rm -rf $PKG/usr/share/em8300 $PKG/usr/bin/{autocal,dhc,dxr3view}
-#	mkdir -p $PKG/etc/udev/rules.d
-#	install -m 644 em8300-udev.rules $PKG/etc/udev/rules.d/90-em8300.rules
-}

em8300/README

@@ -1,29 +0,0 @@
-REQUIREMENTS
-
-PRE-INSTALL
-
-POST-INSTALL
-
-	* Run depmod -a
-
-	* You may edit your /etc/modprobe.conf, I use this settings:
-
-alias em8300-1 off
-alias char-major-121 em8300
-install em8300 /sbin/modprobe bt865 && /sbin/modprobe --ignore-install em8300
-options em8300 dicom_fix=0 dicom_control=0 dicom_other_pal=0
-
-	* Edit /etc/rc.modules to load the modules at boot time.
-
-	* You may also run em8300setup to change the default parameters.
-
-	* If you are using udev, you may want to create 
-	  /etc/udev/rules.d/xx-em8300.rules with something like:
-
-KERNEL=="em8300*", NAME="%k", OWNER="root", GROUP="em8300", MODE="660"
-
-
-PRECAUTION
-	This port builds em8300 with NTSC by default.
-	After installing this port you need to rebuild mplayer to
-	add dxr3 support.

em8300/em8300-ntsc.diff

@@ -1,11 +0,0 @@
---- em8300-0.15.3/modules/Makefile.orig	2006-04-09 23:29:04.000000000 -0400
-+++ em8300-0.15.3/modules/Makefile	2006-04-09 23:29:59.000000000 -0400
-@@ -69,7 +69,7 @@
- endif
- 
- EXTRA_CFLAGS := -I$(EM8300_DIR)/include \
--		-DEM8300_VIDEOMODE_DEFAULT=EM8300_VIDEOMODE_PAL \
-+		-DEM8300_VIDEOMODE_DEFAULT=EM8300_VIDEOMODE_NTSC \
- 		-DEM8300_AUDIOMODE_DEFAULT=EM8300_AUDIOMODE_ANALOG \
- 		-DEM8300_VERSION=\"$(EM8300_VERSION)\" \
- 		-DCONFIG_ADV717X_PIXELPORT16BIT -DCONFIG_ADV717X_PIXELPORTPAL \