Since _dl_tlsdesc_dynamic is called via PLT, we need to add 8 bytes for
push in the PLT entry to align the stack.
[BZ #20309]
* configure.ac (have-mtls-dialect-gnu2): Set to yes if
-mtls-dialect=gnu2 works.
* configure: Regenerated.
* elf/Makefile [have-mtls-dialect-gnu2 = yes]
(tests): Add tst-gnu2-tls1.
(modules-names): Add tst-gnu2-tls1mod.
($(objpfx)tst-gnu2-tls1): New.
(tst-gnu2-tls1mod.so-no-z-defs): Likewise.
(CFLAGS-tst-gnu2-tls1mod.c): Likewise.
* elf/tst-gnu2-tls1.c: New file.
* elf/tst-gnu2-tls1mod.c: Likewise.
* sysdeps/x86_64/dl-tlsdesc.S (_dl_tlsdesc_dynamic): Add 8
bytes for push in the PLT entry to align the stack.
Define LO_HI_LONG to skip pos_h since it is ignored by kernel:
static inline loff_t pos_from_hilo(unsigned long high, unsigned long low)
{
#define HALF_LONG_BITS (BITS_PER_LONG / 2)
return (((loff_t)high << HALF_LONG_BITS) << HALF_LONG_BITS) | low;
}
where size of loff_t == size of long.
[BZ #20349]
* sysdeps/unix/sysv/linux/x86_64/sysdep.h (LO_HI_LONG): New.
AArch64 uses HWCAP bits but they are not defined in sys/auxv.h.
This patch adds a copy of the linux v4.6 arm64 uapi asm/hwcap.h
definitions.
* sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h: New.
When glibc is built with --enable-profile, the ENTRY of
asm functions includes CALL_MCOUNT for profiling.
(matters for binaries static linked against libc_p.a.)
CALL_MCOUNT did not save/restore argument registers
around the _mcount call so it clobbered them.
(it is enough to only save/restore the arguments passed
to a given asm function, but that would be too many asm
changes so it is simpler to always save all argument
registers in this macro.)
float args are not saved: mcount does not clobber the
float regs and currently no asm function takes float
arguments anyway.
[BZ #18707]
* sysdeps/aarch64/Makefile (CFLAGS-mcount.c): Add -mgeneral-regs-only.
* sysdeps/aarch64/sysdep.h (CALL_MCOUNT): Save argument registers.
The p{read,write}v{64} consolidation patch [1] added a wrong guard
for LO_HI_LONG definition. It currently uses both
'__WORDSIZE == 64' and 'defined __ASSUME_WORDSIZE64_ILP32' to set
the value to be passed in one argument, otherwise it will be split
in two.
However it fails on MIPS64n32 where syscalls n32 uses the compat
implementation in the kernel meaning the off_t arguments are passed
in two separate registers.
GLIBC already defines a macro for such cases (__OFF_T_MATCHES_OFF64_T),
so this patch uses it instead.
Checked on x86_64, i686, x32, aarch64, armhf, and s390.
* sysdeps/unix/sysv/linux/sysdep.h
[__WORDSIZE == 64 || __ASSUME_WORDSIZE64_ILP32] (LO_HI_LONG): Remove
guards.
* misc/tst-preadvwritev-common.c: New file.
* misc/tst-preadvwritev.c: Use tst-preadvwritev-common.c.
* misc/tst-preadvwritev64.c: Use tst-preadwritev-common.c and add
a check for files larger than 2GB.
[1] 4751bbe2ad4d1bfa05774e29376d553ecfe563b0
This patch removes the __ASSUME_OFF_DIFF_OFF64 define introduced in
p{read,write} consolidation patch. This define was added based on
the idea 32 bits ports would continue to follow previous off{64}_t
definition where off_t size differs from off64_t one.
However, with recent AArch64/ILP32 patch submission and also with
discussion for RISCV kernel interface, 32 bits ports now may aim
to use off_t and off64_t with the same size as 64 bits.
So current assumption for both p{read,write} and p{read,write}v
are not compatible with new type definition. This patch now makes
the syscall wrappers to only depend on __OFF_T_MATCHES_OFF64_T to
define the default and 64-suffix variant, as follow:
<function>.c
#ifndef __OFF_T_MATCHES_OFF64_T
/* build <function> */
#endif
and
<function>64.c
/* build <function>64 */
#ifdef __OFF_T_MATCHES_OFF64_T
weak_alias (fallocate64, fallocate)
#endif
Tested on x86_64, i686, x32, and armhf.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_OFF_DIFF_OFF64): Remove define.
* sysdeps/unix/sysv/linux/pread.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pread): Replace by
__OFF_T_MATCHES_OFF64_T.
* sysdeps/unix/sysv/linux/pread64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pread64): Likewise.
* sysdeps/unix/sysv/linux/preadv.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (preadv): Likewise.
* sysdeps/unix/sysv/linux/preadv64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwrite.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwrite): Likewise.
* sysdeps/unix/sysv/linux/pwrite64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwrite64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c
[__WORDSIZE != 64 || __ASSUME_OFF_DIFF_OFF64] (pwritev64): Likewise.
The previous uses of this symbol were all in wordsize-32 code.
In commit eeddfa91cbb1 ("Consolidate off_t/off64_t syscall
argument passing") it was expanded to be used in pread/pwrite.
Accordingly, we only define it in 32-bit compilation modes now.
Both tilepro and tilegx32 follow this convention for the
kernel ABI. tilegx64 follows it for passing 128-bit values,
but there are no such ABIs in the kernel.
Commit a6a4395d fixed modf implementation by compiling s_modf.c and
s_modff.c with -fsignaling-nans. However these files are also included
from the pre-POWER5+ implementation, and thus these files should also
be compiled with -fsignaling-nans.
Changelog:
[BZ #20240]
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_modf-ppc32.c): New variable.
(CFLAGS-s_modff-ppc32.c): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(CFLAGS-s_modf-ppc64.c): Likewise.
(CFLAGS-s_modff-ppc64.c): Likewise.
On s390, the current prelink undo code in elf_machine_lazy_rel()
has the requirement, that the plt stubs use the first got slots
after the 3 reserved ones.
In case of undoing prelink, the plt got slots are reset to the correct
addresses whithin the corresponding plt-stub. Therefore the address
is calculated by the address of the first plt-stub-address which
was written by prelink (see l->l_mach.plt) to got[1] and index of
current relocation multiplied with 32 (=size of one plt slot).
The index was calculated with ¤t-got-slot - &got[3].
This patch removes the requirement, that the plt-got-slots are
starting at got[3]. The index is now calculated with
¤t-reloc - &reloc[0]. The first struct Elf64_Rela is stored
at DT_JMPREL.
This patch is needed to prepare for partial relro support.
Ulrich Weigand suggested this approach to use DT_JMPREL - Thanks.
ChangeLog:
* sysdeps/s390/linkmap.h (struct link_map_machine):
Remove member gotplt and add member jmprel.
* sysdeps/s390/s390-32/dl-machine.h
(elf_machine_runtime_setup): Setup member jmprel with DT_JMPREL
instead of gotplt with &got[3].
(elf_machine_lazy_rel): Calculate address with reloc and jmprel.
* sysdeps/s390/s390-64/dl-machine.h: Likewise.
If the input values are unaligned and if there are null characters in the
memory before the starting address of the input values, strcasecmp
gives incorrect return code. Fixed it by adding mask the bits that
are not part of the string.
In a reference to PR ld/19908 make ld.so respect symbol export classes
aka visibility and treat STV_HIDDEN and STV_INTERNAL symbols as local,
preventing such symbols from preempting exported symbols.
According to the ELF gABI[1] neither STV_HIDDEN nor STV_INTERNAL symbols
are supposed to be present in linked binaries:
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
however some GNU binutils versions produce such symbols in some cases.
PR ld/19908 is one and we also have this note in scripts/abilist.awk:
so clearly there is linked code out there which contains such symbols
which is prone to symbol table misinterpretation, and it'll be more
productive if we handle this gracefully, under the Robustness Principle:
"be liberal in what you accept, and conservative in what you produce",
especially as this is a simple (STV_HIDDEN|STV_INTERNAL) => STB_LOCAL
mapping.
References:
[1] "System V Application Binary Interface - DRAFT - 24 April 2001",
The Santa Cruz Operation, Inc., "Symbol Table",
<http://www.sco.com/developers/gabi/2001-04-24/ch4.symtab.html>
* sysdeps/generic/ldsodefs.h
(dl_symbol_visibility_binds_local_p): New inline function.
* elf/dl-addr.c (determine_info): Treat hidden and internal
symbols as local.
* elf/dl-lookup.c (do_lookup_x): Likewise.
* elf/dl-reloc.c (RESOLVE_MAP): Likewise.
nearbyint and nearbyintf should not trigger inexact exceptions, but
should still trigger an invalid exception for a sNaN input.
The SPARC specific implementations of these functions save the FSR at
the beginning of the function and restore it at the end to not trigger
an inexact exception. This however doesn't work for an sNaN input which
need to trigger an invalid exception. Fix that by adding a fcmp
instruction using the input value before saving FSR, so that an invalid
exception is triggered for a sNaN input.
This fixes the math/test-nearbyint-except test on SPARC.
Changelog:
* sparc/sparc32/sparcv9/fpu/s_nearbyint.S (__nearbyint): Trigger an
invalid exception for a sNaN input.
* sparc/sparc32/sparcv9/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-vis3.S
(__nearbyint_vis3): Likewise
* sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-vis3.S
(__nearbyintf_vis3): Likewise
* sparc/sparc64/fpu/s_nearbyint.S (__nearbyint): Likewise.
* sparc/sparc64/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sparc/sparc64/fpu/multiarch/s_nearbyint-vis3.S (__nearbyint_vis3):
Likewise.
* sparc/sparc64/fpu/multiarch/s_nearbyintf-vis3.S (__nearbyintf_vis3):
Likewise.
If assembler doesn't support AVX512DQ, _dl_runtime_resolve_avx is used
to save the first 8 vector registers, which only saves the lower 256
bits of vector register, for lazy binding. When it is called on AVX512
platform, the upper 256 bits of ZMM registers are clobbered. Parameters
passed in ZMM registers will be wrong when the function is called the
first time. This patch requires binutils 2.24, whose assembler can store
and load ZMM registers, to build x86-64 glibc. Since mathvec library
needs assembler support for AVX512DQ, we disable mathvec if assembler
doesn't support AVX512DQ.
[BZ #20139]
* config.h.in (HAVE_AVX512_ASM_SUPPORT): Renamed to ...
(HAVE_AVX512DQ_ASM_SUPPORT): This.
* sysdeps/x86_64/configure.ac: Require assembler from binutils
2.24 or above.
(HAVE_AVX512_ASM_SUPPORT): Removed.
(HAVE_AVX512DQ_ASM_SUPPORT): New.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/dl-trampoline.S: Make HAVE_AVX512_ASM_SUPPORT
check unconditional.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c: Likewise.
* sysdeps/x86_64/multiarch/memcpy.S: Likewise.
* sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-avx512-no-vzeroupper.S:
Likewise.
* sysdeps/x86_64/multiarch/memmove-avx512-unaligned-erms.S:
Likewise.
* sysdeps/x86_64/multiarch/memmove.S: Likewise.
* sysdeps/x86_64/multiarch/memmove_chk.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy.S: Likewise.
* sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memset-avx512-no-vzeroupper.S:
Likewise.
* sysdeps/x86_64/multiarch/memset-avx512-unaligned-erms.S:
Likewise.
* sysdeps/x86_64/multiarch/memset.S: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core_avx512.S: Check
HAVE_AVX512DQ_ASM_SUPPORT instead of HAVE_AVX512_ASM_SUPPORT.
* sysdeps/x86_64/fpu/multiarch/svml_d_exp8_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_d_log8_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_d_pow8_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core_avx512.:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_cosf16_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_logf16_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_powf16_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf16_core_avx51:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_sinf16_core_avx512.S:
Likewise.
current vector function declaration "#pragma omp declare simd notinbranch",
according to which vector sincos should have vector of pointers for second and
third parameters. It is fixed with implementation as wrapper to version
having second and third parameters as pointers.
[BZ #20024]
* sysdeps/x86/fpu/test-math-vector-sincos.h: New.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos2_core_sse4.S: Fixed ABI
of this implementation of vector function.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos4_core_avx2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core_avx512.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf16_core_avx512.S:
Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf4_core_sse4.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/svml_s_sincosf8_core_avx2.S: Likewise.
* sysdeps/x86_64/fpu/svml_d_sincos2_core.S: Likewise.
* sysdeps/x86_64/fpu/svml_d_sincos4_core.S: Likewise.
* sysdeps/x86_64/fpu/svml_d_sincos4_core_avx.S: Likewise.
* sysdeps/x86_64/fpu/svml_d_sincos8_core.S: Likewise.
* sysdeps/x86_64/fpu/svml_s_sincosf16_core.S: Likewise.
* sysdeps/x86_64/fpu/svml_s_sincosf4_core.S: Likewise.
* sysdeps/x86_64/fpu/svml_s_sincosf8_core.S: Likewise.
* sysdeps/x86_64/fpu/svml_s_sincosf8_core_avx.S: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen2-wrappers.c: Use another wrapper
for testing vector sincos with fixed ABI.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen16-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen4-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen8-avx2-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-float-vlen8-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx.c: New test.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx512.c: Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos.c: Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx.c: Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx512.c: Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf.c: Likewise.
* sysdeps/x86_64/fpu/Makefile: Added new tests.
Commits d81f90cc and 89faa0340 replaced called to __isnan and __isinf
by the corresponding GCC builtins. In turns GCC emits calls to _Qp_cmp.
We should therefore add _Qp_cmp to localplt.data as otherwise the
elf/check-localplt test fails with:
Extra PLT reference: libc.so: _Qp_cmp
A similar change has already been done for SPARC32 in commit 6ef1cb95.
Changelog:
* sysdeps/unix/sysv/linux/sparc/sparc64/localplt.data: Add _Qp_cmp.
This implementation is based on the one already used at
sysdeps/x86_64/fpu/e_expf.S.
This implementation improves the performance by ~14% on average in synthetic
benchmarks at the cost of decreasing accuracy to 1 ULP.
The patched change fixes a regression for executables compiled with the
-p option and linked with gcrt1.o. The executables crash on startup.
This regression was introduced in 2.22 and was noticed in the gcc testsuite.
Although the Enhanced REP MOVSB/STOSB (ERMS) implementations of memmove,
memcpy, mempcpy and memset aren't used by the current processors, this
patch adds Prefer_ERMS check in memmove, memcpy, mempcpy and memset so
that they can be used in the future.
* sysdeps/x86/cpu-features.h (bit_arch_Prefer_ERMS): New.
(index_arch_Prefer_ERMS): Likewise.
* sysdeps/x86_64/multiarch/memcpy.S (__new_memcpy): Return
__memcpy_erms for Prefer_ERMS.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
(__memmove_erms): Enabled for libc.a.
* ysdeps/x86_64/multiarch/memmove.S (__libc_memmove): Return
__memmove_erms or Prefer_ERMS.
* sysdeps/x86_64/multiarch/mempcpy.S (__mempcpy): Return
__mempcpy_erms for Prefer_ERMS.
* sysdeps/x86_64/multiarch/memset.S (memset): Return
__memset_erms for Prefer_ERMS.
For some reasons I have not investigated yet, tst-mode-switch-1 hangs on
a MIPS UTM-8 machine running an o32 userland and a 3.6.1 kernel.
This patch changes the test so that it runs under the test-skeleton
framework, causing the test to fail after a timeout instead of hanging
the whole testsuite. At the same time, also change the tst-mode-switch-2
and tst-mode-switch-3 tests.
Changelog:
* sysdeps/mips/tst-mode-switch-1.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* sysdeps/mips/tst-mode-switch-2.c (main): Likewise.
* sysdeps/mips/tst-mode-switch-3.c (main): Likewise.
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00577.html>, TS
18661-1 disallows ceil, floor, round and trunc functions from raising
the "inexact" exception, in accordance with general IEEE 754 semantics
for when that exception is raised. Fixing this for x87 floating point
is more complicated than for the other versions of these functions,
because they use the frndint instruction that raises "inexact" and
this can only be avoided by saving and restoring the whole
floating-point environment.
As I noted in
<https://sourceware.org/ml/libc-alpha/2016-06/msg00128.html>, I have
now implemented a GCC option -fno-fp-int-builtin-inexact for GCC 7,
such that GCC will inline these functions on x86, without caring about
"inexact", when the default -ffp-int-builtin-inexact is in effect.
This allows users to get optimized code depending on the options they
pass to the compiler, while making the out-of-line functions follow TS
18661-1 semantics and avoid "inexact".
This patch duly fixes the out-of-line trunc function implementations
to avoid "inexact", in the same way as the nearbyint implementations.
I do not know how the performance of implementations such as these
based on saving the environment and changing the rounding mode
temporarily compares to that of the C versions or SSE 4.1 versions (of
course, for 32-bit x86 SSE implementations still need to get the
return value in an x87 register); it's entirely possible other
implementations could be faster in some cases.
Tested for x86_64 and x86.
[BZ #15479]
* sysdeps/i386/fpu/s_trunc.S (__trunc): Save and restore
floating-point environment rather than just control word.
* sysdeps/i386/fpu/s_truncf.S (__truncf): Likewise.
* sysdeps/i386/fpu/s_truncl.S (__truncl): Save and restore
floating-point environment, with "invalid" exceptions merged in,
rather than just control word.
* sysdeps/x86_64/fpu/s_truncl.S (__truncl): Likewise.
* math/libm-test.inc (trunc_test_data): Do not allow spurious
"inexact" exceptions.
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00577.html>, TS
18661-1 disallows ceil, floor, round and trunc functions from raising
the "inexact" exception, in accordance with general IEEE 754 semantics
for when that exception is raised. Fixing this for x87 floating point
is more complicated than for the other versions of these functions,
because they use the frndint instruction that raises "inexact" and
this can only be avoided by saving and restoring the whole
floating-point environment.
As I noted in
<https://sourceware.org/ml/libc-alpha/2016-06/msg00128.html>, I have
now implemented a GCC option -fno-fp-int-builtin-inexact for GCC 7,
such that GCC will inline these functions on x86, without caring about
"inexact", when the default -ffp-int-builtin-inexact is in effect.
This allows users to get optimized code depending on the options they
pass to the compiler, while making the out-of-line functions follow TS
18661-1 semantics and avoid "inexact".
This patch duly fixes the out-of-line floor function implementations
to avoid "inexact", in the same way as the nearbyint implementations.
I do not know how the performance of implementations such as these
based on saving the environment and changing the rounding mode
temporarily compares to that of the C versions or SSE 4.1 versions (of
course, for 32-bit x86 SSE implementations still need to get the
return value in an x87 register); it's entirely possible other
implementations could be faster in some cases.
Tested for x86_64 and x86.
[BZ #15479]
* sysdeps/i386/fpu/s_floor.S (__floor): Save and restore
floating-point environment rather than just control word.
* sysdeps/i386/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/i386/fpu/s_floorl.S (__floorl): Save and restore
floating-point environment, with "invalid" exceptions merged in,
rather than just control word.
* sysdeps/x86_64/fpu/s_floorl.S (__floorl): Likewise.
* math/libm-test.inc (floor_test_data): Do not allow spurious
"inexact" exceptions.
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00577.html>, TS
18661-1 disallows ceil, floor, round and trunc functions from raising
the "inexact" exception, in accordance with general IEEE 754 semantics
for when that exception is raised. Fixing this for x87 floating point
is more complicated than for the other versions of these functions,
because they use the frndint instruction that raises "inexact" and
this can only be avoided by saving and restoring the whole
floating-point environment.
As I noted in
<https://sourceware.org/ml/libc-alpha/2016-06/msg00128.html>, I have
now implemented a GCC option -fno-fp-int-builtin-inexact for GCC 7,
such that GCC will inline these functions on x86, without caring about
"inexact", when the default -ffp-int-builtin-inexact is in effect.
This allows users to get optimized code depending on the options they
pass to the compiler, while making the out-of-line functions follow TS
18661-1 semantics and avoid "inexact".
This patch duly fixes the out-of-line ceil function implementations to
avoid "inexact", in the same way as the nearbyint implementations.
I do not know how the performance of implementations such as these
based on saving the environment and changing the rounding mode
temporarily compares to that of the C versions or SSE 4.1 versions (of
course, for 32-bit x86 SSE implementations still need to get the
return value in an x87 register); it's entirely possible other
implementations could be faster in some cases.
Tested for x86_64 and x86.
[BZ #15479]
* sysdeps/i386/fpu/s_ceil.S (__ceil): Save and restore
floating-point environment rather than just control word.
* sysdeps/i386/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/i386/fpu/s_ceill.S (__ceill): Save and restore
floating-point environment, with "invalid" exceptions merged in,
rather than just control word.
* sysdeps/x86_64/fpu/s_ceill.S (__ceill): Likewise.
* math/libm-test.inc (ceil_test_data): Do not allow spurious
"inexact" exceptions.
Commit 43c29487 tried to fix the vfork aliases in libpthread.so on MIPS
and SPARC, but failed to do it correctly, introducing an ABI change.
This patch does the remaining changes needed to align the MIPS and SPARC
vfork implementations with the other architectures. That way the the
alpha version of pt-vfork.S works correctly for MIPS and SPARC. The
changes for alpha were done in 82aab97c.
Changelog:
* sysdeps/unix/sysv/linux/mips/vfork.S (__vfork): Rename into
__libc_vfork.
(__vfork) [IS_IN (libc)]: Remove alias.
(__libc_vfork) [IS_IN (libc)]: Define as an alias.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
atomic_compare_and_exchange_bool_rel and
catomic_compare_and_exchange_bool_rel are removed and replaced with the
new C11-like atomic_compare_exchange_weak_release. The concurrent code
in nscd/cache.c has not been reviewed yet, so this patch does not add
detailed comments.
* nscd/cache.c (cache_add): Use new C11-like atomic operation instead
of atomic_compare_and_exchange_bool_rel.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise.
* include/atomic.h (atomic_compare_and_exchange_bool_rel,
catomic_compare_and_exchange_bool_rel): Remove.
* sysdeps/aarch64/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/alpha/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/arm/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/mips/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/tile/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
The x86_64 and i386 versions of scalbl return sNaN for some cases of
sNaN input and are missing "invalid" exceptions for other cases. This
results from overly complicated code that either returns a NaN input,
or discards both inputs when one is NaN and loads a NaN from memory.
This patch fixes this by simplifying the code to add the arguments
when either one is NaN.
Tested for x86_64 and x86.
[BZ #20296]
* sysdeps/i386/fpu/e_scalbl.S (__ieee754_scalbl): Add arguments
when either argument is a NaN.
* sysdeps/x86_64/fpu/e_scalbl.S (__ieee754_scalbl): Likewise.
* math/libm-test.inc (scalb_test_data): Add sNaN tests.
The i386 implementations of nearbyint functions, and x86_64
nearbyintl, contain code to mask the "inexact" exception. However,
the fnstenv instruction has the effect of masking all exceptions, so
this masking code has been redundant since fnstenv was added to those
implementations (by commit 846d9a4a3acdb4939ca7bf6aed48f9f6f26911be;
commit 71d1b0166b4ace0d804af2993b3815758b852efc added the test
math/test-nearbyint-except-2.c that verifies these functions do work
when called with "inexact" traps enabled); this patch removes the
redundant code.
Tested for x86_64 and x86.
* sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Do not mask
"inexact" exceptions after fnstenv.
* sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
* sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
This file was added to sysdeps/generic/bits in 2012. This appears to
have been an oversight, as the entire sysdeps/generic/bits directory was
moved to the top level in 2005. Accordingly the generic bits/hwcap.h
belongs there too.
* sysdeps/generic/bits/hwcap.h: Moved to ...
* bits/hwcap.h: Here.
This patch fixes the p{readv,writev}{64} consolidation implementation
from commits 4e77815 and af5fdf5. Different from pread/pwrite
implementation, preadv/pwritev implementation does not require
__ALIGNMENT_ARG because kernel syscall prototypes define
the high and low part of the off_t, if it is the case, directly
(different from pread/pwrite where the architecture ABI for passing
64-bit values must be in consideration for passsing the arguments).
It also adds some basic tests for preadv/pwritev.
Tested on x86_64, i686, and armhf.
* misc/Makefile (tests): Add tst-preadvwritev and tst-preadvwritev64.
* misc/tst-preadvwritev.c: New file.
* misc/tst-preadvwritev64.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Remove SYSCALL_LL{64}
usage.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/sysdep.h (LO_HI_LONG): New macro.
is the fastest way to search for '\0'. Otherwise use memchr with an infinite
size. This is 3x faster on benchtests for large sizes. Passes GLIBC tests.
* sysdeps/aarch64/rawmemchr.S (__rawmemchr): New file.
* sysdeps/aarch64/strlen.S (__strlen): Change to __strlen to avoid PLT.
cases: small copies of up to 16 bytes, medium copies of 17..96 bytes which are
fully unrolled. Large copies of more than 96 bytes align the destination and
use an unrolled loop processing 64 bytes per iteration. In order to share code
with memmove, small and medium copies read all data before writing, allowing
any kind of overlap. All memmoves except for the large backwards case fall
into memcpy for optimal performance. On a random copy test memcpy/memmove are
40% faster on Cortex-A57 and 28% on Cortex-A53.
* sysdeps/aarch64/memcpy.S (memcpy):
Rewrite of optimized memcpy and memmove.
* sysdeps/aarch64/memmove.S (memmove): Remove
memmove code (merged into memcpy.S).
With recent binutils versions the GNU libc fails to build on at least
MISP and SPARC, with this kind of error:
/home/aurel32/glibc/glibc-build/nptl/libpthread.so:(*IND*+0x0): multiple definition of `vfork@GLIBC_2.0'
/home/aurel32/glibc/glibc-build/nptl/libpthread.so::(.text+0xee50): first defined here
It appears that on these architectures pt-vfork.S includes vfork.S
(through the alpha version of pt-vfork.S) and that the __vfork aliases
are not conditionalized on IS_IN (libc) like on other architectures.
Therefore the aliases are also wrongly included in libpthread.so.
Fix this by properly conditionalizing the aliases like on other
architectures.
Changelog:
* sysdeps/unix/sysv/linux/mips/vfork.S (__vfork): Conditionalize
hidden_def, weak_alias and strong_alias on [IS_IN (libc)].
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it. This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.
The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity. These are currently enabled
as GNU extensions.
fdim suffers from double rounding on i386 because subtracting two
double values can produce an inexact long double value exactly half
way between two double values. This patch fixes this by creating an
i386-specific version of fdim - C, based on the generic version,
unlike the previous .S version - which sets the x87 precision control
to double precision for the subtraction and then restores it
afterwards. As noted in the comment added, there are no issues of
double rounding for subnormals (a case that setting precision control
does not address) because subtraction cannot produce an inexact result
in the subnormal range.
Tested for x86_64 and x86.
[BZ #20255]
* sysdeps/i386/fpu/s_fdim.c: New file. Based on math/s_fdim.c.
* math/libm-test.inc (fdim_test_data): Add another test.
Some architectures have their own versions of fdim functions, which
are missing errno setting (bug 6796) and may also return sNaN instead
of qNaN for sNaN input, in the case of the x86 / x86_64 long double
versions (bug 20256).
These versions are not actually doing anything that a compiler
couldn't generate, just straightforward comparisons / arithmetic (and,
in the x86 / x86_64 case, testing for NaNs with fxam, which isn't
actually needed once you use an unordered comparison and let the NaNs
pass through the same subtraction as non-NaN inputs). This patch
removes the x86 / x86_64 / powerpc versions, so that those
architectures use the generic C versions, which correctly handle
setting errno and deal properly with sNaN inputs. This seems better
than dealing with setting errno in lots of .S versions.
The i386 versions also return results with excess range and precision,
which is not appropriate for a function exactly defined by reference
to IEEE operations. For errno setting to work correctly on overflow,
it's necessary to remove excess range with math_narrow_eval, which
this patch duly does in the float and double versions so that the
tests can reliably pass on x86. For float, this avoids any double
rounding issues as the long double precision is more than twice that
of float. For double, double rounding issues will need to be
addressed separately, so this patch does not fully fix bug 20255.
Tested for x86_64, x86 and powerpc.
[BZ #6796]
[BZ #20255]
[BZ #20256]
* math/s_fdim.c: Include <math_private.h>.
(__fdim): Use math_narrow_eval on result.
* math/s_fdimf.c: Include <math_private.h>.
(__fdimf): Use math_narrow_eval on result.
* sysdeps/i386/fpu/s_fdim.S: Remove file.
* sysdeps/i386/fpu/s_fdimf.S: Likewise.
* sysdeps/i386/fpu/s_fdiml.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdim.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdimf.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdiml.S: Likewise.
* sysdeps/powerpc/fpu/s_fdim.c: Likewise.
* sysdeps/powerpc/fpu/s_fdimf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: Likewise.
* sysdeps/x86_64/fpu/s_fdiml.S: Likewise.
* math/libm-test.inc (fdim_test_data): Expect errno setting on
overflow. Add sNaN tests.
This implementation utilizes vectors to improve performance
compared to current byte by byte implementation for POWER7.
The performance improvement is upto 4x. This patch is tested
on powerpc64 and powerpc64le.
The dbl-64 implementation of atan2, passed arguments (sNaN, qNaN),
fails to raise the "invalid" exception. This patch fixes it to add
both arguments, rather than just adding the second argument to itself,
in the case where the second argument is a NaN (which is checked for
before checking for the first argument being a NaN). sNaN tests for
atan2 are added, along with some qNaN tests I noticed were missing but
should have been there by analogy with other tests present.
Tested for x86_64 and x86.
[BZ #20252]
* sysdeps/ieee754/dbl-64/e_atan2.c (__ieee754_atan2): Add both
arguments when second argument is a NaN.
* math/libm-test.inc (atan2_test_data): Add sNaN tests and more
qNaN tests.
Various implementations of frexp functions return sNaN for sNaN
input. This patch fixes them to add such arguments to themselves so
that qNaN is returned.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #20250]
* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Add non-finite input to
itself.
* sysdeps/ieee754/dbl-64/s_frexp.c (__frexp): Add non-finite or
zero input to itself.
* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c (__frexp):
Likewise.
* sysdeps/ieee754/flt-32/s_frexpf.c (__frexpf): Likewise.
* sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Likewise.
* sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise.
* math/libm-test.inc (frexp_test_data): Add sNaN tests.
This patch removes __ASSUME_FUTEX_LOCK_PI usage and assumes that
kernel will correctly return if it supports or not
futex_atomic_cmpxchg_inatomic.
Current PI mutex code already has runtime support by calling
prio_inherit_missing and returns ENOTSUP if the futex operation fails
at initialization (it issues a FUTEX_UNLOCK_PI futex operation).
Also, current minimum supported kernel (v3.2) will return ENOSYS if
futex_atomic_cmpxchg_inatomic is not supported in the system:
kernel/futex.c:
2628 long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
2629 u32 __user *uaddr2, u32 val2, u32 val3)
2630 {
2631 int ret = -ENOSYS, cmd = op & FUTEX_CMD_MASK;
[...]
2667 case FUTEX_UNLOCK_PI:
2668 if (futex_cmpxchg_enabled)
2669 ret = futex_unlock_pi(uaddr, flags);
[...]
2686 return ret;
2687 }
The futex_cmpxchg_enabled is initialized by calling cmpxchg_futex_value_locked,
which calls futex_atomic_cmpxchg_inatomic.
For ARM futex_atomic_cmpxchg_inatomic will be either defined (if both
CONFIG_CPU_USE_DOMAINS and CONFIG_SMP are not defined) or use the
default generic implementation that returns ENOSYS.
For m68k is uses the default generic implementation.
For mips futex_atomic_cmpxchg_inatomic will return ENOSYS if cpu has no
'cpu_has_llsc' support (defined by each chip supporte inside kernel).
For sparc, 32-bit kernel will just use default generic implementation,
while 64-bit kernel has support.
Tested on ARM (v3.8 kernel) and x86_64.
* nptl/pthread_mutex_init.c [__ASSUME_FUTEX_LOCK_PI]
(prio_inherit_missing): Remove define.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_FUTEX_LOCK_PI):
Likewise.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_FUTEX_LOCK_PI): Likewise.
After some discussion in libc-alpha about this POSIX compliance fix, I see
that GLIBC should indeed revert back to previous definition of msghdr and
cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some
reasons:
* The possible issue where the syscalls wrapper add the compatibility
layer is quite limited in scope and range. And kernel current
also add some limits to the values on the internal msghdr and
cmsghdr fields:
- msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns
EMSGSIZE.
- msghdr::msg_controllen larger than INT_MAX returns ENOBUFS.
* There is a small performance hit for recvmsg/sendmsg/recmmsg which
is neglectable, but it is a big hit for sendmmsg since now instead
of calling the syscall for the packed structure, GLIBC is calling
multiple sendmsg. This defeat the very existence of the syscall.
* It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt).
However the fix is incomplete because it does add any runtime check
since libsanitizer currently does not have any facility to intercept
symbols with multiple version [2].
This, along with incorret dlsym/dlvsym return for versioned symbol due
another bug [3], makes hard to interpose versioned symbols.
Also, current approach of fixing GCC PR#71445 leads to half-baked
solutions without versioned symbol interposing.
This patch basically reverts commits 2f0dc39029ae08, 222c2d7f4357d66,
af7f7c7ec8dea1. I decided to not revert abf29edd4a3918 (Adjust
kernel-features.h defaults for recvmsg and sendmsg) mainly because it
does not really address the POSIX compliance original issue and also
adds some cleanups.
Tested on x86, i386, s390, s390x, aarch64, and powerpc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445
[2] https://github.com/google/sanitizers/issues/628
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932
* conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
* nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and
ptw-oldsendmsg.
(CFLAGS-oldrecvmsg.c): Remove rule.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmsg.c): Add rule.
(CFLAGS-sendmsg.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg.
(CFLAGS-recvmsg.c): Remove rule.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-oldrecvmsg.c): Likewise.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmmsg.c): Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert
to kernel defined interfaces.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
(msghdr.__glibc_reserved1): Remove member.
(msghdr.__glibc_reserved2): Likewise.
(cmsghdr.__glibc_reserved1): Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file.
* sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous
version.
* sysdeps/unix/sysv/linux/recvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24):
Remove recvmsg and sendmsg.
* sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file
* sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24
version for {recv,send,recm,sendm}msg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
The i386/x86_64 versions of log2l return sNaN for sNaN input. This
patch fixes them to add NaN inputs to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20235]
* sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Add NaN input to
itself.
* sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Likewise.
* math/libm-test.inc (log2_test_data): Add sNaN tests.
The ldbl-128ibm version of log1pl returns sNaN for sNaN input. This
patch fixes it to add such inputs to themselves so that qNaN is
returned in this case.
Tested for powerpc.
[BZ #20234]
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Add positive
infinity or NaN input to itself.
