zabbix_agentd: update to 1.8.6

zabbix_agentd/.md5sum

@@ -1,3 +1,3 @@
-3255afd2d44454bae3ec5158920a824f  zabbix-1.6.8.tar.gz
+4642fd263167211a73a02fe7f3bcd998  zabbix-1.8.6.tar.gz
 bc2e7ce7694d32379188c547acd0b04e  zabbix_agentd
-6263862541a35aa1037db545909074d6  zabbix_agentd.conf
+c1eea6e91c56d37a3cbf80072cf30905  zabbix_agentd.conf

zabbix_agentd/Pkgfile

@@ -4,7 +4,7 @@
 # Depends on:
 
 name=zabbix_agentd
-version=1.6.8
+version=1.8.6
 release=1
 source=(http://download.sourceforge.net/zabbix/ZABBIX%20Latest%20Stable/$version/zabbix-$version.tar.gz \
 		$name.conf $name)

zabbix_agentd/zabbix_agentd.conf

@@ -1,88 +1,248 @@
-# This is config file for zabbix_agentd
+# This is a config file for Zabbix Agent (Unix)
-# To get more information about ZABBIX, go http://www.zabbix.com
+# To get more information about Zabbix, visit http://www.zabbix.com
 
 ############ GENERAL PARAMETERS #################
 
-# List of comma delimited IP addresses (or hostnames) of ZABBIX servers. 
+### Option: PidFile
-# No spaces allowed. First entry is used for sending active checks.
+#	Name of PID file.
-# Note that hostnames must resolve hostname->IP address and
+#
-# IP address->hostname.
+# Mandatory: no
-
+# Default:
-Server=127.0.0.1
+# PidFile=/tmp/zabbix_agentd.pid
-
-# Server port for sending active checks
-
-#ServerPort=10051
-
-# Unique hostname. Required for active checks.
-
-Hostname=localhost
-
-# Listen port. Default is 10050
-
-#ListenPort=10050
-
-# IP address to bind agent
-# If missing, bind to all available IPs
-
-#ListenIP=127.0.0.1
-
-# Number of pre-forked instances of zabbix_agentd.
-# Default value is 5
-# This parameter must be between 5 and 16
-
-#StartAgents=5
-
-# How often refresh list of active checks. 2 minutes by default.
-
-#RefreshActiveChecks=120
-
-# Disable active checks. The agent will work in passive mode listening server.
-
-#DisableActive=1
-
-# Enable remote commands for ZABBIX agent. By default remote commands disabled.
-
-#EnableRemoteCommands=1
-
-# Specifies debug level
-# 0 - debug is not created
-# 1 - critical information
-# 2 - error information
-# 3 - warnings
-# 4 - information (default)
-# 5 - for debugging (produces lots of information)
-
-DebugLevel=3
-
-# Name of PID file
 
 PidFile=/var/run/zabbix_agentd/zabbix_agentd.pid
 
-# Name of log file.
+### Option: LogFile
-# If not set, syslog will be used
+#	Name of log file.
+#	If not set, syslog is used.
+#
+# Mandatory: no
+# Default:
+# LogFile=
 
 LogFile=/var/log/zabbix_agentd/zabbix_agentd.log
 
-# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.
+### Option: LogFileSize
+#	Maximum size of log file in MB.
+#	0 - disable automatic log rotation.
+#
+# Mandatory: no
+# Range: 0-1024
+# Default:
+# LogFileSize=1
+
 LogFileSize=10
 
-# Spend no more than Timeout seconds on processing
+### Option: DebugLevel
-# Must be between 1 and 30
+#	Specifies debug level
+#	0 - no debug
+#	1 - critical information
+#	2 - error information
+#	3 - warnings
+#	4 - for debugging (produces lots of information)
+#
+# Mandatory: no
+# Range: 0-4
+# Default:
+# DebugLevel=3
 
-Timeout=3
+### Option: SourceIP
+#	Source IP address for outgoing connections.
+#
+# Mandatory: no
+# Default:
+# SourceIP=
+
+### Option: EnableRemoteCommands
+#	Whether remote commands from Zabbix server are allowed.
+#	0 - not allowed
+#	1 - allowed
+#
+# Mandatory: no
+# Default:
+# EnableRemoteCommands=0
+
+### Option: LogRemoteCommands
+#	Enable logging of executed shell commands as warnings.
+#	0 - disabled
+#	1 - enabled
+#
+# Mandatory: no
+# Default:
+# LogRemoteCommands=0
+
+##### Passive checks related
+
+### Option: Server
+#	List of comma delimited IP addresses (or hostnames) of Zabbix servers.
+#	No spaces allowed. First entry is used for receiving list of and sending active checks.
+#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
+#
+# Mandatory: yes
+# Default:
+# Server=
+
+Server=127.0.0.1
+
+### Option: Hostname
+#	Unique, case sensitive hostname.
+#	Required for active checks and must match hostname as configured on the server.
+#	Value is acquired from HostnameItem if undefined.
+#
+# Mandatory: no
+# Default:
+# Hostname=
+
+Hostname=localhost
+
+### Option: HostnameItem
+#	Item used for generating Hostname if it is undefined.
+#	Ignored if Hostname is defined.
+#
+# Mandatory: no
+# Default:
+# HostnameItem=system.hostname
+
+### Option: ListenPort
+#	Agent will listen on this port for connections from the server.
+#
+# Mandatory: no
+# Range: 1024-32767
+# Default:
+# ListenPort=10050
+
+### Option: ListenIP
+#	List of comma delimited IP addresses that the agent should listen on.
+#
+# Mandatory: no
+# Default:
+# ListenIP=0.0.0.0
+
+### Option: DisablePassive
+#	Disable passive checks. The agent will not listen on any TCP port.
+#	Only active checks will be processed.
+#	0 - do not disable
+#	1 - disable
+#
+# Mandatory: no
+# Default:
+# DisablePassive=0
+
+##### Active checks related
+
+### Option: DisableActive
+#	Disable active checks. The agent will work in passive mode listening for server.
+#
+# Mandatory: no
+# Default:
+# DisableActive=0
+
+### Option: ServerPort
+#	Server port for retrieving list of and sending active checks.
+#
+# Mandatory: no
+# Default:
+# ServerPort=10051
+
+### Option: RefreshActiveChecks
+#	How often list of active checks is refreshed, in seconds.
+#
+# Mandatory: no
+# Range: 60-3600
+# Default:
+# RefreshActiveChecks=120
+
+### Option: BufferSend
+#	Do not keep data longer than N seconds in buffer.
+#
+# Mandatory: no
+# Range: 1-3600
+# Default:
+# BufferSend=5
+
+### Option: BufferSize
+#	Maximum number of values in a memory buffer. The agent will send
+#	all collected data to Zabbix Server or Proxy if the buffer is full.
+#
+# Mandatory: no
+# Range: 2-65535
+# Default:
+# BufferSize=100
+
+### Option: MaxLinesPerSecond
+#	Maximum number of new lines the agent will send per second to Zabbix Server
+#	or Proxy processing 'log' and 'logrt' active checks.
+#	The provided value will be overridden by the parameter 'maxlines',
+#	provided in 'log' or 'logrt' item keys.
+#
+# Mandatory: no
+# Range: 1-1000
+# Default:
+# MaxLinesPerSecond=100
+
+### Option: AllowRoot
+#	Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
+#       will try to switch to user 'zabbix' instead. Has no effect if started under a regular user.
+#	0 - do not allow
+#	1 - allow
+#
+# Mandatory: no
+# Default:
+# AllowRoot=0
+
+############ ADVANCED PARAMETERS #################
+
+### Option: Alias
+#	Sets an alias for parameter. It can be useful to substitute long and complex parameter name with a smaller and simpler one.
+#
+# Mandatory: no
+# Range:
+# Default:
+
+### Option: StartAgents
+#	Number of pre-forked instances of zabbix_agentd that process passive checks.
+#
+# Mandatory: no
+# Range: 1-100
+# Default:
+# StartAgents=3
+
+### Option: Timeout
+#	Spend no more than Timeout seconds on processing
+#
+# Mandatory: no
+# Range: 1-30
+# Default:
+# Timeout=3
+
+### Option: Include
+#	You may include individual files or all files in a directory in the configuration file.
+#
+# Mandatory: no
+# Default:
+# Include=
+
+# Include=/etc/zabbix/zabbix_agentd.userparams.conf
+# Include=/etc/zabbix/zabbix_agentd/
 
 ####### USER-DEFINED MONITORED PARAMETERS #######
-# Format: UserParameter=<key>,<shell command>
-# Note that shell command must not return empty string or EOL only
-#UserParameter=system.test,who|wc -l
-### Set of parameter for monitoring MySQL server (v3.23.42 and later)
-### Change -u<username> and add -p<password> if required
-#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l
-#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
-#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
-#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
-#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
-#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"
-#UserParameter=mysql.version,mysql -V
 
+### Option: UnsafeUserParameters
+#	Allow all characters to be passed in arguments to user-defined parameters.
+#	0 - do not allow
+#	1 - allow
+#
+# Mandatory: no
+# Range: 0-1
+# Default:
+# UnsafeUserParameters=0
+
+### Option: UserParameter
+#	User-defined parameter to monitor. There can be several user-defined parameters.
+#	Format: UserParameter=<key>,<shell command>
+#	Note that shell command must not return empty string or EOL only.
+#	See 'zabbix_agentd' directory for examples.
+#
+# Mandatory: no
+# Default:
+# UserParameter=