diff --git a/mimedefang/.footprint b/mimedefang/.footprint
deleted file mode 100644
index 3b65b65b8..000000000
--- a/mimedefang/.footprint
+++ /dev/null
@@ -1,30 +0,0 @@
-drwxr-xr-x	root/root	etc/
-drwxr-xr-x	root/root	etc/mail/
--rw-r--r--	root/root	etc/mail/mimedefang-filter
-drwxr-xr-x	root/root	etc/rc.d/
--rwxr-xr-x	root/root	etc/rc.d/mimedefang
-drwxr-xr-x	root/root	mail/
--rw-r--r--	root/root	mail/mimedefang.conf
-drwxr-xr-x	root/root	usr/
-drwxr-xr-x	root/root	usr/bin/
--rwxr-xr-x	root/root	usr/bin/md-mx-ctrl
--rwxr-xr-x	root/root	usr/bin/mimedefang
--rwxr-xr-x	root/root	usr/bin/mimedefang-multiplexor
--rwxr-xr-x	root/root	usr/bin/mimedefang.pl
--rwxr-xr-x	root/root	usr/bin/watch-mimedefang
-drwxr-xr-x	root/root	usr/man/
-drwxr-xr-x	root/root	usr/man/man5/
--rw-r--r--	root/root	usr/man/man5/mimedefang-filter.5.gz
-drwxr-xr-x	root/root	usr/man/man7/
--rw-r--r--	root/root	usr/man/man7/mimedefang-notify.7.gz
--rw-r--r--	root/root	usr/man/man7/mimedefang-protocol.7.gz
-drwxr-xr-x	root/root	usr/man/man8/
--rw-r--r--	root/root	usr/man/man8/md-mx-ctrl.8.gz
--rw-r--r--	root/root	usr/man/man8/mimedefang-multiplexor.8.gz
--rw-r--r--	root/root	usr/man/man8/mimedefang.8.gz
--rw-r--r--	root/root	usr/man/man8/mimedefang.pl.8.gz
--rw-r--r--	root/root	usr/man/man8/watch-mimedefang.8.gz
-drwxr-xr-x	root/root	var/
-drwxr-xr-x	root/root	var/spool/
-drwxr-x---	clamav/clamav	var/spool/MD-Quarantine/
-drwxr-x---	clamav/clamav	var/spool/MIMEDefang/
diff --git a/mimedefang/.md5sum b/mimedefang/.md5sum
deleted file mode 100644
index 6d5962a27..000000000
--- a/mimedefang/.md5sum
+++ /dev/null
@@ -1,2 +0,0 @@
-6424dd840f1a8251181bffb042e01961  mimedefang-2.58.tar.gz
-67965579efa6d5328359cea13c720f3c  mimedefang.conf
diff --git a/mimedefang/Pkgfile b/mimedefang/Pkgfile
deleted file mode 100644
index ebb6852c8..000000000
--- a/mimedefang/Pkgfile
+++ /dev/null
@@ -1,27 +0,0 @@
-# Description: A mail filtering framework
-# URL: http://www.mimedefang.org
-# Maintainer: Mikhail Kolesnik, mike at openbunker dot org
-# Depends on: clamav p5-mime-tools p5-io-stringy p5-mailtools p5-digest-sha1 p5-unix-syslog
-
-name=mimedefang
-version=2.58
-release=1
-source=(http://www.mimedefang.org/static/$name-$version.tar.gz
-		mimedefang.conf)
-
-build () {
-	cd $name-$version
-	./configure --prefix=/usr \
-		    --with-user=clamav \
-		    --sysconfdir=/etc
-	make
-	make DESTDIR=$PKG install
-	sed -i \s/"\/var\/spool\/MIMEDefang\/clamd\.sock"/"\/var\/run\/clamav\/clamd\.sock"/ $PKG/usr/bin/mimedefang.pl
-	install -D -m 755 examples/init-script $PKG/etc/rc.d/mimedefang
-	install -D -m 644 $SRC/mimedefang.conf $PKG/etc/mail/mimedefang.conf
-	mkdir -p $PKG/var/spool/MIMEDefang $PKG/var/spool/MD-Quarantine
-	chown clamav:clamav $PKG/var/spool/MIMEDefang
-	chown clamav:clamav $PKG/var/spool/MD-Quarantine
-	chmod 750 $PKG/var/spool/MIMEDefang
-	chmod 750 $PKG/var/spool/MD-Quarantine
-}
diff --git a/mimedefang/README b/mimedefang/README
deleted file mode 100644
index 60398764a..000000000
--- a/mimedefang/README
+++ /dev/null
@@ -1,20 +0,0 @@
-README for mimedefang
-
-REQUIREMENTS
-You'll need clamav with "--enable-milter", milter capable mail transport agent (only
-sendmail is assumed in this port, for others - you should edit/move
-configuration files).
-
-PRE-INSTALL
-
-POST-INSTALL
-Edit sendmail.mc to add something like this:
-
- INPUT_MAIL_FILTER(`mimedefang', `S=local:/var/spool/MIMEDefang/mimedefang.sock, F=T, T=C:20s;S:25s;R:25s;E:1m')dnl
- define(`confINPUT_MAIL_FILTERS', `mimedefang')dnl
-
-RESOURCES
-HOWTO http://www.mickeyhill.com/mimedefang-howto/
-FAQ http://www.mimedefang.org/node.php?id=6
-
-PRECAUTION
diff --git a/mimedefang/mimedefang.conf b/mimedefang/mimedefang.conf
deleted file mode 100644
index 43daa36ee..000000000
--- a/mimedefang/mimedefang.conf
+++ /dev/null
@@ -1,123 +0,0 @@
-SPOOLDIR='/var/spool/MIMEDefang'
-
-# The socket used by mimedefang to communicate with sendmail
-SOCKET=$SPOOLDIR/mimedefang.sock
-
-# Run the multiplexor and filters as this user, not root.  RECOMMENDED
-MX_USER=clamav
-
-# Syslog facility
-SYSLOG_FACILITY=mail
-
-# If you want to keep spool directories around if the filter fails,
-# set the next one to yes
-# KEEP_FAILED_DIRECTORIES=no
-
-# "yes" turns on the multiplexor relay checking function
-# MX_RELAY_CHECK=no
-
-# "yes" turns on the multiplexor HELO checking function
-# MX_HELO_CHECK=no
-
-# "yes" turns on the multiplexor sender checking function
-# MX_SENDER_CHECK=no
-
-# "yes" turns on the multiplexor recipient checking function
-# MX_RECIPIENT_CHECK=no
-
-# Set to yes if you want the multiplexor to log events to syslog
-MX_LOG=yes
-
-# Set to yes if you want to use an embedded Perl interpreter
-# MX_EMBED_PERL=yes
-
-# Set to full path of socket for Sendmail's SOCKETMAP map, if you
-# want to use it with MIMEDefang
-# MX_MAP_SOCKET=$SPOOLDIR/map.sock
-
-# The multiplexor does not start all slaves at the same time.  Instead,
-# it starts one slave every MX_SLAVE_DELAY seconds when the system is idle.
-# (If the system is busy, the multiplexor starts slaves as incoming mail
-# requires attention.)
-# MX_SLAVE_DELAY=3
-
-# The next setting is an absolute limit on slave activation.  The multiplexor
-# will NEVER activate a slave within MX_MIN_SLAVE_DELAY seconds of another.
-# The default of zero means that the multiplexor will activate slaves as
-# quickly as necessary to keep up with incoming mail.
-# MX_MIN_SLAVE_DELAY=0
-
-# Set to yes if you want the multiplexor to log stats in
-# /var/log/mimedefang/stats  The /var/log/mimedefang directory must
-# exist and be writable by the user you're running MIMEDefang as.
-# MX_STATS=no
-
-# Number of slaves reserved for connections from loopback.  Use -1
-# for default behaviour, 0 to allow loopback connections to queue,
-# or >0 to reserve slaves for loopback connections
-LOOPBACK_RESERVED_CONNECTIONS=-1
-
-# Set to yes if you want the stats file flushed after each entry
-# MX_FLUSH_STATS=no
-
-# Set to yes if you want the multiplexor to log stats to syslog
-# MX_STATS_SYSLOG=no
-
-# The socket used by the multiplexor
-MX_SOCKET=$SPOOLDIR/mimedefang-multiplexor.sock
-
-# Maximum # of requests a process handles
-# MX_REQUESTS=200
-
-# Minimum number of processes to keep.  The default of 0 is probably
-# too low; we suggest 2 instead.
-MX_MINIMUM=4
-
-# Maximum number of processes to run (mail received while this many
-# processes are running is rejected with a temporary failure, so be
-# wary of how many emails you receive at a time).  This applies only
-# if you DO use the multiplexor.  The default value of 2 is probably
-# too low; we suggest 10 instead
-MX_MAXIMUM=10
-
-# Uncomment to log slave status; it will be logged every
-# MX_LOG_SLAVE_STATUS_INTERVAL seconds
-# MX_LOG_SLAVE_STATUS_INTERVAL=30
-
-# Uncomment next line to have busy slaves send status updates to the
-# multiplexor.  NOTE: Consumes one extra file descriptor per slave, plus
-# a bit of CPU time.
-# MX_STATUS_UPDATES=yes
-
-# Limit slave processes' resident-set size to this many kilobytes.  Default
-# is unlimited.
-# MX_MAX_RSS=10000
-
-# Limit total size of slave processes' memory space to this many kilobytes.
-# Default is unlimited.
-# MX_MAX_AS=30000
-
-# If you want to use the "notification" facility, set the appropriate port.
-# See the mimedefang-notify man page for details.
-# MX_NOTIFIER=inet:4567
-
-# Number of seconds a process should be idle before checking for
-# minimum number and killed
-# MX_IDLE=300
-
-# Number of seconds a process is allowed to scan an email before it is
-# considered dead.  The default is 30 seconds; we suggest 600.
-MX_BUSY=20
-
-# Extra sendmail macros to pass.  Actually, you can add any extra
-# mimedefang options here...
-# MD_EXTRA="-a auth_author"
-
-# Multiplexor queue size -- default is 0 (no queueing)
-# MX_QUEUE_SIZE=10
-
-# Multiplexor queue timeout -- default is 30 seconds
-# MX_QUEUE_TIMEOUT=30
-
-# SUBFILTER specifies which filter rules file to use
-SUBFILTER=/etc/mail/mimedefang-filter